Stamping with Stampendous! and Clear Scraps~

Hi guys!
Your read right, stamping with Stampendous! and Clear Scraps.
I have a couple of projects to share using Clear Scraps wood
 shapes with Stampendous! stamps.  I have never just stamped on wood, treating
it like paper but I did just that.

I created a short tutorial, with photos, to show how this was put together~

#1.  The wood hearts were sanded lightly and then painted with a coat of acrylic paint.

 Color you choose~

#2. The image was stamped on the wood using Distress Oxide/Jet Black.  I heat set it with a heat tool.

#3. Acrylic paints were used along with a no.0 size paint brush.  

#4. After the image is painted. heat dry, speckle with black acrylic paint.  I use an old toothbrush brush.  Gives you good control on the splats.

#5. The Stampendous! stamp set comes with a die, so I die cut the branch with leaves from green cardstock.

Another key ring was created using the same supplies, except for the stamp.
 Take a look~

Here is a short tutorial~

#1. This one was created a little different.  The stamp used is a 6"X 6" background stamp by Stampendous! and the wood heart by Clear Scraps is 4"X 4".  Sand the wood heart lightly and wipe down with a soft cloth.

#2. Add spots of color (Distress Oxide) in random areas on the stamp.

#3. Lay the wood heart on top of the inked stamp and press all around making sure the heart has been inked.

#4. Heat set with a heat tool and then splat lightly with black ink.
#5. Punch a hole in the top of the wood heart, add an "o" ring and trim with fabric strips.

Products used:

Clear Scraps: 4" wood hearts

Stampendous!: Monkey with die set

Stampendous!: 6" Fern Garden stamp

Ink: Distress Oxide

Paint: DecoArt

other: "o" rings, fabric, cardstock

Thanks for stopping by~
Connie Mercer/DT Member